AC50 High-Rise Building Facade Cleaning Drone

Short Description:

Remote-controlled high-pressure cleaning drone for building exterior walls and glass below 50 m. 4,000 psi nozzle pressure, 18 L/min water flow, 50 m flight altitude, dual 14S 33,000 mAh semi-solid batteries and RTK positioning.


  • Application: Building exterior wall and glass, height below 50 m
  • Flight altitude: 50 m
  • Max ascent speed: 5 m/s
  • Max descent speed: 3 m/s
  • Nozzle pressure: 4,000 psi (27.6 MPa)
  • Water flow: 18 L/min
  • Product Detail

    Product Tags

    AC50 High-Rise Building Facade Cleaning Drone

    The AC50 is our 50 m class high-pressure facade cleaning drone. It carries a spray boom and nozzle set to the working height, washes glass, metal and stone facades with a 4,000 psi (27.6 MPa) jet at 18 L/min, and runs on two 14S 33,000 mAh semi-solid batteries. The operator stays on the ground while the aircraft holds position along the wall.

    It is built for building exterior walls and glass curtain walls on structures below 50 m, with a flight altitude of 50 m, a maximum ascent speed of 5 m/s and a descent speed of 3 m/s.

    What the AC50 Does

    The AC50 is a high pressure cleaning drone for the vertical surfaces of low and mid-rise buildings. A forward-mounted spray boom directs the jet onto the facade while the aircraft holds a fixed distance from the wall, so the wash follows the same line on every pass instead of varying from crew to crew.

    • 4,000 psi nozzle pressure — lifts dust, algae film, traffic grime and hard-water staining
    • 18 L/min water flow — practical coverage for elevations up to 50 m
    • 50 m flight altitude, 5 m/s ascent — steady, predictable climbs up the facade
    • Dual 14S 33,000 mAh semi-solid batteries — longer working windows between charges
    • RTK positioning and obstacle avoidance radar — both installed as standard
    • 50 m water hose with a 150 m manual pipe winder — a compact, lighter set-up than the 100 m class

    Technical Specifications

    Model AC50
    Application Building exterior wall and glass, height below 50 m
    Flight altitude 50 m
    Max ascent speed 5 m/s
    Max descent speed 3 m/s
    Nozzle pressure 4,000 psi (27.6 MPa)
    Water flow 18 L/min

    Standard Configuration

    Motor ×4 T12
    Propeller ×4 40132
    Drone frame ×1 Carbon fiber + aviation aluminum
    Battery ×2 Semi-solid battery 14S 33,000 mAh
    Charger ×1 3,000 W smart fast charging
    Remote control ×1 H12
    Obstacle avoidance radar ×1 Installed
    RTK ×1 Installed
    Electric ground pump ×1 4 kW, 280 kg pressure
    Water pipe ×1 50 m, outer diameter 12 mm, inner diameter 6 mm
    Manual pipe winder ×1 Can collect 150 m
    Spray boom ×3 1–1.5 m (50 cm, 70 cm, 100 cm)
    Nozzle ×8 0°, 15°, 25°, 40°
    Tool box ×1 / transport case ×1 Included
    Drone weight 18 kg without batteries and water pipe
    Maximum load 22 kg
    Maximum take-off weight 50 kg
    Spread size 2,025 × 1,970 × 690 mm (±10 mm)
    Folded size 860 × 730 × 690 mm (±10 mm)
    Package size 1,440 × 890 × 880 mm / 140 kg
    Optional extra battery USD 750 per unit

    Flight Time at Working Height

    Operating height Flight time
    10 m 21 minutes 30 seconds
    20 m 18 minutes 10 seconds
    30 m 17 minutes 30 seconds
    40 m 15 minutes 8 seconds
    50 m 13 minutes 22 seconds

    Why Clean Facades with a Drone Instead of Rope Access?

    Traditional window and facade cleaning depends on rope technicians, gondolas or scaffolding — each one a scheduling, safety and cost problem on a live building. A drone window cleaning system changes the set-up:

    • No working at height. The operator stays on the ground, so the fall-risk exposure of the crew is removed.
    • Faster mobilisation. No cradle rigging, no scaffolding permit, no facade anchor installation.
    • Regular washing becomes practical. Because a wash costs less to arrange, facades can be cleaned on a schedule instead of once a year.
    • Consistent coverage. A machine that repeats the same spray distance and angle does not vary from crew to crew.

    Where the AC50 Is Used

    Low and mid-rise commercial buildings

    Office buildings, banks, clinics and retail units of three to fifteen storeys, where hiring a rope team or a gondola for a small elevation rarely makes economic sense.

    Residential blocks and hotels

    Apartment buildings, serviced apartments and hotels where scaffolding would disturb residents and guests, and where a compact 50 m hose set-up can be deployed from the roof or the yard.

    Glass, metal and stone facades

    Aluminium-framed curtain walls, glazed shopfronts, composite panels and stone cladding, cleaned with the 0°, 15°, 25° and 40° nozzle set so pressure stays on the surface rather than in the joints.

    Solar panels and roofs on low buildings

    Single-storey and low factory roofs, canopies and rooftop arrays where sending staff up is the main risk and the main cost.

    Cleaning Drone Model Comparison

    Model Application Nozzle pressure Water flow
    AC300 Building exterior wall and glass below 300 m 6,200 psi 20 L/min
    AC100 Building exterior wall and glass below 100–150 m 5,000 psi 20 L/min
    AC50 Building exterior wall and glass below 50 m 4,000 psi 18 L/min
    AS-50 Solar panel and roof cleaning (with tank) 1 MPa 15 L/min
    AS-30 Solar panel and roof cleaning (with tank) 1 MPa 15 L/min

    Working above 50 m? The AC100 facade cleaning drone covers the 100–150 m class, and the AC300 covers buildings up to 300 m. See the full cleaning drone range.

    OEM/ODM and Global Distribution

    Aolan is a drone manufacturer established in 2016 and supplies the AC50 as a curtain wall cleaning drone platform for cleaning contractors, property and facility-management companies, and equipment distributors. The AC50 is available for OEM/ODM configuration, and we recruit regional and multi-store distributors.

    • Minimum order quantity: 1 unit
    • Price basis: EXW, quoted per configuration and order volume
    • Payment: 50% T/T in advance, balance before shipment
    • Delivery: 2–40 working days after full payment
    • Shipment: sea, air or courier as required

    Frequently Asked Questions

    How high can the AC50 facade cleaning drone work?

    The AC50 is specified for building exterior walls and glass below 50 m, with a flight altitude of 50 m and a maximum ascent speed of 5 m/s.

    What nozzle pressure and water flow does the AC50 deliver?

    4,000 psi (27.6 MPa) nozzle pressure at 18 L/min water flow, with 0°, 15°, 25° and 40° nozzles supplied as standard.

    How long can the AC50 fly at working height?

    Flight time depends on altitude: about 21 minutes 30 seconds at 10 m, 18 minutes 10 seconds at 20 m and 13 minutes 22 seconds at 50 m, with the dual 14S 33,000 mAh battery set.

    What comes in the standard package?

    Four T12 motors, 40132 propellers, carbon fiber and aviation aluminum frame, two 14S 33,000 mAh semi-solid batteries, 3,000 W charger, H12 remote control, obstacle avoidance radar, RTK, 4 kW ground pump, 50 m water pipe, 150 m manual pipe winder, three spray booms, eight nozzles, tool box and transport case.

    Is the AC50 the same platform as the AC100?

    The AC50 uses the same airframe platform and control system as the AC100, with a smaller ground pump and a shorter hose set for work below 50 m. Choose the AC100 for facades in the 100–150 m class.

    Can Aolan supply the AC50 for OEM/ODM and distribution?

    Yes. Aolan is a manufacturer established in 2016 offering OEM/ODM and global distributor recruitment. Minimum order quantity is 1 unit.

    Request an AC50 Quotation

    Tell us the building height, facade material and the number of units you need, and we will come back with configuration options and pricing. Contact Aolan Drone →


  • Previous:
  • Next:

  • Write your message here and send it to us